+ Reply to Thread
Results 1 to 3 of 3

Thread: defrost timers question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2002
    Posts
    37
    Post Likes
    I have a question about freezer timers, does the timer control the contacter for the compressor? If it does,then if I had a bad timer I would not have any volts on T1 T2 T3or would it. basically I have a freezer that has power to the timer but is not running . I also found a ground wire and the compressor run wire burnt in half. the rest of the wires the plastic coat over the insulation on the wire looks iffy (is iffy even correct word). so I know I'm going to replace all the iffy wire.

  2. #2
    Join Date
    Mar 2003
    Posts
    388
    Post Likes
    there are different ways of wiring them, (assuming that this is electric defrost) what I usually do is to wire the liquid line solenoid valve through the defrost clock,
    that means when the unit goes into defrost ti pumps down and the contactor is controlled by the low pressure control
    hem

  3. #3
    Join Date
    Feb 2003
    Posts
    1,173
    Post Likes
    Iffy dont start after replacing the "Iffy wire" .
    Call 1-800 REFRIGFY and we can refrigurate it for U.
    Watts New, Ohm My, I been Electrically Commutated. Are U2.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •