LON over IP

[381engineer]

Humor me while I try to understand what you are trying to accomplish.

It looks like the ilon is already passing data to EBI and you want to integrate the ilon into a Jace and then add the jace to the EBI network?

What's the ultimate goal? (Forgive me if I'm missing the obvious)

[ddcfreek]

Humor me while I try to understand what you are trying to accomplish.

It looks like the ilon is already passing data to EBI and you want to integrate the ilon into a Jace and then add the jace to the EBI network?

What's the ultimate goal? (Forgive me if I'm missing the obvious)

The ultimate goal is the remove the iLon from EBI. The entire facility is going from EBI and migrating to AX. For now I have both EBI and AX in the config server so I don't interupt comm.

[RACLman]

The ultimate goal is the remove the iLon from EBI. The entire facility is going from EBI and migrating to AX. For now I have both EBI and AX in the config server so I don't interupt comm.

That sounds dangerous, sharing anything with EBI is problematic at best. How many lon channels are you dealing with and where does the 600 reside in all this?

[ddcfreek]

That sounds dangerous, sharing anything with EBI is problematic at best. How many lon channels are you dealing with and where does the 600 reside in all this?

There is only one lon channel and only one 600.

[lwarren]

lwarren:
Did you discover the Ilon's or did you have to add them manually? Were you able to discover points?

The config server is in the EBI computer and I already added my jace.

The rest:
Stop fighting or we'll turn this website around...

It has been probably two years ago since I beta tested this, so I don't remember the exact setup process for the Ilons. I will see if I can find any notes I might have made. I think you had to add another LonNetwork for the Ilons but I am not 100% sure on that.

I was able to discover points and write to setpoints without a problem during my test.