Results 1 to 4 of 4
05-22-2010, 09:49 AM #1Regular Guest
- Join Date
- Oct 2009
venting 2 gas fireplaces through 1 vert chase
i am venting 2 gas fireplaces through 1 chase. there will be only 18-20 inches between the direct vent termination caps horizontally . one fireplace has to be power vented because of long run (47 ft) fireplace manual iffy ,doesnt show this situation. one clearance says i need 3 feet from mechanical inlet supply duct. power venter manual shows 2 fireplaces through ROOF with minimum 6 feet between caps. company i install for tells me i only need 16 inches. I couldnt be more confused. any help greatly appreciated thanks, jay
05-22-2010, 01:43 PM #2
What type of fire place naturally vent with a power vent ? going 47ft. stright up maybe increase size to what the installation manual states .GOOD WORK IS NOT CHEAP! AND CHEAP WORK IS NOT GOOD!
IF YOU THINK A GOOD HVAC COMPANY IS EXPENSIVE. THEN YOU SHOULD TRY A BAD ONE.
05-22-2010, 10:54 PM #3
move to FP forum
Make, models, model power vent kit?
If you can power vent, why does it need to terminate vertically?
If you send a sketch to the mfr, they can usually approve or sketch modifications.
05-22-2010, 10:57 PM #4
Moved to Fireplace forum.Contractor locator map
How many times must one fix something before it is fixed?