Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2008
    Posts
    17

    carrier bryant payne guys help me

    I am an installer and im sure you guys will flame me for this for some reason I cant post here with out there being a fight but we will try again The house we bought has a payne builders model 90% 2004-2005 vintage and has a bryant coil on it
    Model cd5axa060024abaa
    serial 5104x57769
    http://www.docs.hvacpartners.com/idc...t/cc5a-8pd.pdf
    We are going to be installing a bryant heat pump wondering if there is a model you guys recommend and if we should replace the coil or leave it it says 22 or 410 just need to add the metering device just looking for any ideas and or help I guess its just easier at work it sits by the door and they tell you to go install it its harder when its my money i get my shops cost plus 10% so any help or ideas would be helpful we are in michigan and propane is the other heat source

  2. #2
    Join Date
    Dec 2003
    Location
    south NJ shore area
    Posts
    360
    get a new 410 cnpvp carrier coil and buy a 15seer Payne a/c heat pump PH15...... Summer is on the way ......so is fall and winter...... you will soon need this.
    GOOD WORK IS NOT CHEAP! AND CHEAP WORK IS NOT GOOD!

    IF YOU THINK A GOOD HVAC COMPANY IS EXPENSIVE. THEN YOU SHOULD TRY A BAD ONE.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event