Results 1 to 6 of 6

Thread: Roof flashing?

Hybrid View

  1. #1
    Join Date
    May 2004
    Posts
    3
    I apologize if this is the wrong area for this question. I'm installing ventilation for a small glass torch and need flashing to fit over a 12" pipe(stack) on the roof. I just spent 4 hours searching the net and calling every store near me that could possibly have it with no luck.

    I would be soooo grateful if someone could point me in the right direction. Is there any place online I could order 12" flashing? Or anyone know of a place near Orange County Cali?

    Thank you! Boog

  2. #2
    Join Date
    Sep 2003
    Location
    Birmingham,Alabama
    Posts
    298
    A 12" flashing?Are you installing this in your home?Is this gravity or forced air ventilation?

  3. #3
    Join Date
    Apr 2001
    Location
    san jose,ca.
    Posts
    5,285
    Look in the yellow pages for sheet metal shop. If they don`t stock one they cam make one for you

  4. #4
    Join Date
    May 2004
    Posts
    3
    It's in my garage. I need the 12" because I've got two fans on each side of a hood connected to 10" duct which both lead up to 12" duct. Reducing the 12" would reduce the cfms too much.

    [Edited by boogalou on 06-17-2004 at 07:48 PM]

  5. #5
    Join Date
    Dec 2002
    Posts
    9,871
    You shouldn't flash on the roof. It will freak out the neighbors and its probably illegal in most states!!

  6. #6
    Join Date
    Apr 2001
    Location
    san jose,ca.
    Posts
    5,285
    That would be called a 12" roof flashing with top or 12" fan jack.
    You need to tell the sheetmetal shop what pitch your roof is & also if it`s shakes or composition.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event