Originally Posted by BergerMech Rob
Make sure you note the depth of the sensor. I usually measure it with a tape measure and make a mark on the new ones with a sharpie so I can get it right the first time and close it up quickly.
The easiest way to change them is on the fly right after a service pumpdown.
Yeah you got get it right the first time, once that ferral fitting seats on the sensor...you're stuck with it.
Sic Semper Tyrannis.
Yes, I have seen guys jam it all the way to the bottom of the pipe, and when it's tightened, guess what happens to the sensor.