Results 1 to 4 of 4
  1. #1
    Join Date
    Mar 2004
    Posts
    5

    Confused

    I would like to feed my ice maker with water from my reverse osmosis unit. I'll be using 3/8" poly tubing (since you can't use copper per the manufacturer). My question is...is poly tubing suitable for use in walls and in the attic? My refrigerator is on the other side of my kitchen from my sink (which has the r/o system under it). It would be extremely difficult to run the line in the lower cabinets.

    Any help would be greatly appreciated.

  2. #2
    Join Date
    Apr 2001
    Location
    Camel City, NC
    Posts
    6,233

    Water line

    I would rather run it through the cabinets where I live. Wouldn't want to risk it freezing in the winter.
    Be safe not fast. body parts don't grow back

  3. #3
    They make plastic tubing for that, is this a home ice maker? 1/4" is plenty for that ya know.
    Hey cockroach, don't bug me! ©

    www.AskTheDiceman.com

    www.TheColdConspiracy.com

    www.Pennwood-HVAC.Com

    Bring Em Home....

  4. #4
    Join Date
    May 2004
    Posts
    51
    Just like other lines we run, a long run needs to be stepped up sometimes.
    I ran mine with 3/8's, it worked o.k. I still see a little of a pressure drop even though it isn't a far run. I figure it is due to the RO pressure being low compared to pump tap pressure. It doesn't seem to affect the ice fill, but the tap on the door of the refer is slow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event