have you ever.....

[Airhead]

I spend 25 minutes trying to remember where I put the screw.

[Workhorse]

Originally posted by midhvac

Originally posted by thehumid1
It is okay as long as he "becomes ONE with the screw"

I did that once when I sat on a zip screw.

Did someone tell you to "go screw yourself" before you did it?

[CityHvac]

Originally posted by workhorse

Originally posted by midhvac
Sometimes you're better off looking at that really long screw for 25 minutes before you put it back where a really short screw went and run it through the condenser

Been there, Done that.

Ooops

It's that real faint hissing sound that you hear as your packing up your tools in a hurry to beat the traffic so you can get an early start on your vacation.....right!

[Workhorse]

Originally posted by westemp

Originally posted by workhorse

Originally posted by midhvac
Sometimes you're better off looking at that really long screw for 25 minutes before you put it back where a really short screw went and run it through the condenser

Been there, Done that.

Ooops

It's that real faint hissing sound that you hear as your packing up your tools in a hurry to beat the traffic so you can get an early start on your vacation.....right!

Sure is, as you tell the home owner you'll mail them the bill.

[len]

do you find that the hardest part of the the job is when you try too push that little deck all the way back into the bottom of that reach in,and you are praying out loud dont kink, dont snap, dont leak

[midhvac]

Some of the longest service calls I've been on, were the ones where the guy there before me wasn't there long enough.