-
I spend 25 minutes trying to remember where I put the screw.
-
Originally posted by midhvac
Originally posted by thehumid1
It is okay as long as he "becomes ONE with the screw"
I did that once when I sat on a zip screw.
Did someone tell you to "go screw yourself" before you did it?
-
Originally posted by workhorse
Originally posted by midhvac
Sometimes you're better off looking at that really long screw for 25 minutes before you put it back where a really short screw went and run it through the condenser 
Been there, Done that.
Ooops
It's that real faint hissing sound that you hear as your packing up your tools in a hurry to beat the traffic so you can get an early start on your vacation.....right!
If every a...... could do this,I wouldn't have a job...
-
Originally posted by westemp
Originally posted by workhorse
Originally posted by midhvac
Sometimes you're better off looking at that really long screw for 25 minutes before you put it back where a really short screw went and run it through the condenser 
Been there, Done that.
Ooops
It's that real faint hissing sound that you hear as your packing up your tools in a hurry to beat the traffic so you can get an early start on your vacation.....right!
Sure is, as you tell the home owner you'll mail them the bill.
-
have you ever
do you find that the hardest part of the the job is when you try too push that little deck all the way back into the bottom of that reach in,and you are praying out loud dont kink, dont snap, dont leak
if at first you dont succeed,then skydiving is not for you
-
Some of the longest service calls I've been on, were the ones where the guy there before me wasn't there long enough.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|