-
do any of you guys have a pic of the way this thing is supposed too be hooked up?we tried at the supply house,and it would pull down nicely but as soon as you blank it off it flys right back up,we tried there way of hooking it up{j/bs}with the steel tubing and we got the same results.
if at first you dont succeed,then skydiving is not for you
-
They suck, they don't work and don't give you the real accuracy you'll expect, so don't even bother with it.
-
j/b micron gauge
if at first you dont succeed,then skydiving is not for you
-
Throw it at the supply house managers head for even suggesting you buy it, then get a Thermal or Yellow Jacket.
-
what do you think about the Supco ones, i think thats the name of em
-
I love my Supco gauge.
There are 3 ways to do anything in life; Good, Fast, Slow: You can pick any 2.
-
Thermal VacCheck
It costs a bit but you'll never regret buying it and never wonder about it's readout. Analog is the only way to go on a vacuum gauge.
R2B4BTU
-
There's two different types of sensors for the micron gages out today.
One surpases the other.
(I forgot the rest of the story ..... sorry)
-
I have been using the CPS round ones, they mount on a tee right on the pump and don't get dirty as often.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|