Results 1 to 4 of 4
Thread: Phase monitors??
05-05-2004, 05:43 PM #1
Can someone help me out here?? Do add on 3 phase monitors go in the control circut before or after the Sensetronic oil pressure control. Or does it matter. The condensing unit is a Kramer M# ?? 7 ton unit matched evaps with ll selonoid pump down, defrost timer w/ temp control! Cooler temp is 35-38. 460v line 240v control.
The reason I am asking is one mechanic tells me to install before another to install after the oil-pressure control. I just want to know the best way and right way which ever it is?
When installing you break the low pressure control to the ll selonoid. Correct?
Sometimes when I consider what tremendous consequences come from little things, I am tempted to think there are no little things!
05-05-2004, 06:34 PM #2
I always put them before any controls. I would break circuit right after the control breaker if you have one.
A Diamond is just a piece of coal, that made good under pressure!
05-05-2004, 08:37 PM #3
I second that
05-10-2004, 10:28 AM #4
Thanks for the replies guys, thats the way I will go.Sometimes when I consider what tremendous consequences come from little things, I am tempted to think there are no little things!