Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Apr 2003
    Location
    Levittown, PA
    Posts
    818
    Post Likes
    Can someone help me out here?? Do add on 3 phase monitors go in the control circut before or after the Sensetronic oil pressure control. Or does it matter. The condensing unit is a Kramer M# ?? 7 ton unit matched evaps with ll selonoid pump down, defrost timer w/ temp control! Cooler temp is 35-38. 460v line 240v control.

    The reason I am asking is one mechanic tells me to install before another to install after the oil-pressure control. I just want to know the best way and right way which ever it is?

    When installing you break the low pressure control to the ll selonoid. Correct?


    Thanks

    Rich
    Sometimes when I consider what tremendous consequences come from little things, I am tempted to think there are no little things!

  2. #2
    Join Date
    Jan 2004
    Location
    Earth
    Posts
    4,879
    Post Likes
    I always put them before any controls. I would break circuit right after the control breaker if you have one.

    A Diamond is just a piece of coal, that made good under pressure!

  3. #3
    Join Date
    Nov 2003
    Posts
    1,865
    Post Likes
    I second that

  4. #4
    Join Date
    Apr 2003
    Location
    Levittown, PA
    Posts
    818
    Post Likes

    Thumbs up

    Thanks for the replies guys, thats the way I will go.
    Sometimes when I consider what tremendous consequences come from little things, I am tempted to think there are no little things!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event