Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2005
    Posts
    285

    Liebert UPS via SNMP

    I am trying to bring in several UPS to a Jace via SNMP. I can connect to the device and if I enter oid's manually get good valid data. The problem is I would like to use the mib files for the device but I cannot get AX to compile them. No matter what I do I get compile errors. Anyone familiar with these devices or how to compile the mib?

  2. #2
    Join Date
    May 2009
    Posts
    634
    I am aware there is an order you have to load each MIB file provided but that's about it, included text file explains that. Have looked at them before with ireasoning and the files loaded etc but don't know a thing about jace and how that works.
    Scott Jalbert
    Harris Integrated Solutions

    Formerly Liebert (Emerson Network Power)
    Expressed opinions are my own

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event