I am working with an account that has 2 York YK's with VSD and Opti-View. The program for motor bearing maint. comes up too often. At least once a month we get the display "perform motor bearing maint" or something to that effect. I know I can go into the service menu and update it that the bearings were greased, but next month it will be right back. The ironic part is the chiller hasn't run but 40 hours since the last time it was greased in mid January. Is there a way to change the mant scheduled( Hours interval of actual runtime ) in the program. It has been pretty cold here in Houston so these chiller aren't logging a lot of runtime. When it warms up a little the pony chiller can handle it and these chillers stay idle. Thanks-GEO