Results 1 to 5 of 5

Thread: obsolete tracer

Hybrid View

  1. #1

    obsolete tracer

    I have an obsolete tracer programable controller 50100721 rev16. Can anybody tell me how to get on line with this. Is there special software or can I use hyperterminal?

  2. #2
    Join Date
    Mar 2007
    Location
    State of Confusion
    Posts
    1,210
    You might have better luck if you post this in the "Controls" section.
    Welcome to the site.

  3. #3
    Join Date
    Mar 2007
    Posts
    3,140
    For that model you need the can to string converter, part# CAN1234


  4. #4

    obsolete

    I tried to find the CAN1234 without much luck, can you tell me is this a CAN bus and if it is can I use a 485 differential converter.

  5. #5
    Join Date
    Mar 2007
    Posts
    3,140
    The string is the communication bus, the can is the interface.



    Sorry...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event