FS: Carrier Comfort Zone parts & Dampers
Since I had a complete system changeout recently, I have some parts for sale. Can sell all as a group or parse out as the need arises.
All parts in good working condition.
See pictures at www.pennybaker.com/images/carrier
1. Carrier Comfort Zone 4 zone controller board.
2. Carrier Comfor Zone Main Thermostat (i.e. user interface)
3. Carrier remote room sensor (x2 available).
4. Carrier 14" round damper w/15 second actuator (x3 available).
5. Carrier RDS remote duct temperature sensor (x2 available).
Let me know (respond to this or look me up in profile) if interested. I'm reasonable on prices and figure these parts have too much life left in them to have them sit around my garage and would enable you to service some of your clients with good quality reasonably priced used parts.
Home for Parts
Hi - I may have a good home for the main thermostat and remote room sensors. Are these available and can I connect to get a price?
Glad to help keep the garage clean.
Originally Posted by rlpenny
what u take for the whole lot?
Two Hydrogen atoms met one day. One said to the other "I've lost my electron". The second said "Are you sure?" The first said "Yes, I'm positive".
Is this equipment still available?
Yes...all still available...
Sorry guys...was offline for a while and for some reason...I didn't see any emails saying someone had 'responded' to a thread. Just now (in April) getting back on this forum.
Originally Posted by Alans1
I'll PM folks...
$300 seems decent asking price for the whole lot...
Originally Posted by ambarton
1 - Zone Controller
1 - Main 4-zone Stat
2 - Remote Room Sensors
2 - Remote Duct Sensors
3 - 14" round motorized 15-second dampers
Since I can't get PM to work, interested folk can likely deduce my email from the following three lines.
r o b e r t
p e n n y b a k e r
c o m
Is the master stat still available? we have one that failed and i need to get it replaced.
Only Dampers and Remote Duct Sensors RDS available...
Here's what I have left...
* three (3) 14" round Carrier dampers (older crank arm style actuators, 15 second)
* two (2) remote duct sensors (RDS).
might be interested in those dampers. Send me an email Email Address Removed
Last edited by Chris_Worthington; 02-05-2011 at 09:28 AM.
I could use 1 or two of the 15 sec dampers. Pls contact me asap.
interesed in carrier parts
I really need some of those items for my home system
Carrier Comfort Zone 4 zone controller board.
Carrier 14" round damper w/15 second actuator (x3 available).
Would you please contact Email Address Removed.
Last edited by Chris_Worthington; 01-15-2011 at 07:48 AM.
Reason: Email Address Removed, belongs in your profile.
dampers & remote duct stats all that remain available
Lots of interest in the dampers (3 folk) in 1 day and a half. :-)
OK -- here is the status,
as of 10:21p central prevailing time, I still have the three (3) 14" dampers on hand. Pics of them are linked above or repeated here at www.pennybaker.com/images/carrier/index.htm
one fellow is thinking about two of the dampers.
I also still have two remote duct sensors that work with the early 90s Carrier Comfort Zone system board. So if you've a hanker'in to know the exit temp or your unit or the temp in between your heat pump coil and the water coil or downstream of a hydronic coil, be sure and let me know if you'd like a remote duct sensor.
As of 8/2 only two (2) of the Carrier 14" dampers with 15 second modulators are on hand. Pics of them are linked above or repeated here at www.pennybaker.com/images/carrier/index.htm These are the older crankarm style but in good working order as pictured.
Originally Posted by rlpenny
Two remote duct temperature sensors (RDS) that work with the early 90s Carrier Comfort Zone system board are also still available.