Dear El Presidente
can you sent me setupMS3.exe please.
thanks
Does anyone Can sent me setupMS3.exe too
Dear El Presidente
can you sent me setupMS3.exe please.
thanks
Like most here, could someone please send me the SetupMS3.exe
Much appreciated!
has anyone here ever worked with the D BACS over Ethernet and had the problem that the pc ethernet adaptor keeps connection and disconnecting?
University, my contract to be upgraded their IPaddresses, 7 DBACS, controller I need to change.
I am wondering if someone could send the setupMS3.exe software too. I'm working on a project where this might help. Thanks!
Hello all.. I was wondering or hoping that someone could send me the setupms3.exe software. I was told by daiken their device was configured but the wonderful IT dept changed the IP they were to use and to get the rep back out is very difficult. Any help would be great? Thanks and happy holidays everyone
need your e-mail address in your profile to send you stuff.
-Jeremy
Jeremy thank you. I try to access my profile but the admin has me locked out.
I hate to do this but can u send it to my profile name at ????. Tu
Last edited by Chris_Worthington; 12-21-2012 at 04:51 PM.
ME TOO only at Your email address IS in your profile
Last edited by Chris_Worthington; 12-21-2012 at 04:48 PM.
This is the error message I see when I click on my profile in the upper right corner?? It may be I just have to wait to be activated? No rush, they are doing me the favors so I am a very patient person. Do you know what this error may be?
ah9671rs, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
I just received an answer from the Admin. I must post greater than 7 posts and it will switch me to a regular user. This is why I cant edit my profile. Tomorrow I will read the posts and see if my knowledge can help some people. I thank you for your time.
I was able to add my email address after I made enough posts. When you get a chance can you please forward the software. Again thank you so much and have a happy and safe holiday season.
Hi El Presidente (and any other kind samaritans) - very much appreciate if anyone could email me the SetupMS3 and any other documents which would allow me to do simple on/off/temperature controls directly from a custom written application on windows? I am thinking that all I need to do is connect via TCP/IP on a specific port number and just send strings? Many thanks!
If you add your e-mail address to your profile you can be sent the configuration software but this only allows you to configure a few BACnet parameters. you would have to write/buy BACnet software that you could write custom scripts in to do what you want. Typically you purchase a Building Automation System frontend that speaks BACnet which can be programmed to make graphics allowing you adjust the Daikain system
Hey thanks for replying. I got hold of the MS3 app so I guess I have a starting point. I can't muck around with the Daikin side of things so have to figure out how on earth to do simple things like turn on and off zones by just sending simple strings.
Btw, I have my email in my profile - is it somehow hidden?
I think there was one or two companies that had an rs232 ascii interface for daikin, but I have no experience with it. Might be worth a look.
google brings up:
http://www.xdimax.com/cool/cool.html
http://www.intesis.com/eng/intesisbo..._frame_eng.htm