+ Reply to Thread
Page 2 of 14 FirstFirst 12345678912 ... LastLast
Results 21 to 40 of 273

Thread: Daikin D-BACS Interface

  1. #21
    Join Date
    Apr 2011
    Location
    adelaide south australia
    Posts
    3
    Post Likes
    Thanks much appreciated
    I'm using a web /jace600 with bacnet over ip and have the second port enabled with the ip address of the Daikin bacnet box 192.168.0.1 which is the default ip address
    I can ping the Daikin box directly through the pc however the Jace can't discover anything when connected in!
    All I want to see weather bacnet is enabled in the Daikin box and if so then the problem possibly is with the jace.
    So a start is to see with this software if bacnet is enabled??
    Thanks again
    Regards
    Stan

  2. #22
    Join Date
    Feb 2010
    Posts
    83
    Post Likes
    De nada and you're welcome.

  3. #23
    Join Date
    Feb 2010
    Posts
    83
    Post Likes
    Ok, what's the IP address of the Jace? It will have to be 192.168.0.X if the gateway is left at default IP of 192.168.0.1 without enabling the gateway as a foreign device.

    If it is on a different subnet, say 192.168.1.1, foreign device will have to be enabled inside the gateway and this IP address must be put in so the gateway can send out a request to be added to the BBMD foreign device table.

    BACnet does not need to be enabled. As long as the battery backup switch is turned on and it has an IP address, it is ready to rock. Is the VRV system already connected to the gateway? If not, you will get no points.

    Pres

  4. #24
    Join Date
    May 2011
    Posts
    2
    Post Likes
    Please for the love of everything that is holy send me the setup tool too.

    Getting this from Daikin has proved to be more difficult than pulling 5 girls home from an FHM event.

    Thanks in advance. my email address is in my sig

  5. #25
    Join Date
    Jun 2011
    Posts
    11
    Post Likes
    Is there any chance someone could send me SetupMS3? I can't get a response from Daikin and really need this tool. Thank you.

  6. #26
    Join Date
    Feb 2010
    Posts
    83
    Post Likes
    threefiddy, check your mail.

    Pres

  7. #27
    Join Date
    Feb 2010
    Posts
    83
    Post Likes
    C, add an email to your profile.

    Pres

  8. #28
    Join Date
    Jun 2011
    Posts
    11
    Post Likes
    Quote Originally Posted by El Presidente View Post
    C, add an email to your profile.

    Pres
    Thanks alot, email added.

  9. #29
    Join Date
    Feb 2010
    Posts
    83
    Post Likes
    C, check your mail.

    threefiddy, my e-mail bounced back. Not sure what the problem is.

    Pres

  10. #30
    Join Date
    Jul 2011
    Posts
    2
    Post Likes
    Is there any chance someone could send me SetupMS3 please? I have to change to default IP address for it to talk to our BMS.

    Thankyou in advance.

  11. #31
    Join Date
    Jun 2011
    Posts
    11
    Post Likes
    Quote Originally Posted by kevbev67 View Post
    Is there any chance someone could send me SetupMS3 please? I have to change to default IP address for it to talk to our BMS.

    Thankyou in advance.
    sent

  12. #32
    Join Date
    Jul 2011
    Posts
    1
    Post Likes
    Found these forums by looking for this tool.

    Could someone also forward me the setup tool setupms3?

    Email Address Removed

    Thanks
    Last edited by Chris_Worthington; 09-05-2011 at 08:28 AM. Reason: Email Address Removed

  13. #33
    Join Date
    Mar 2010
    Location
    Kailua, HI
    Posts
    2
    Post Likes
    Aloha all,

    Can someone please send me a copy of SetupMS3? Thank you in advance.

    Mahalo,
    Rich

  14. #34
    Join Date
    Feb 2008
    Location
    Jerzee
    Posts
    56
    Post Likes
    Working on my second DBACS.Can someone please send me a copy of SetupMS3?

  15. #35
    Join Date
    Sep 2011
    Posts
    3
    Post Likes
    Any chance someone can get me a copy of software?

    Daiken programmer is away and we set our network on a .3 subnet, causing conflicts with the DBACS gateway and BMS

    no Setup MS3 = bad!

  16. #36
    Join Date
    Sep 2011
    Posts
    3
    Post Likes
    Anyone? Really need this software asap! SetupMS3

  17. #37
    Join Date
    Apr 2007
    Location
    Greece
    Posts
    19
    Post Likes
    Volgarixon just send you a copy of the specific software, hope this help

  18. #38
    Join Date
    Sep 2011
    Posts
    3
    Post Likes
    Quote Originally Posted by Livadi View Post
    Volgarixon just send you a copy of the specific software, hope this help
    I thank you

  19. #39
    Join Date
    Apr 2011
    Location
    Vancouver BC
    Posts
    8
    Post Likes
    hi all, if someone could do me a huge favour and send me through the setupms3 app, i would be forever grateful.... Cheers

  20. #40
    Join Date
    Apr 2007
    Location
    Greece
    Posts
    19
    Post Likes
    The same exist for you Nickh,

+ Reply to Thread
Page 2 of 14 FirstFirst 12345678912 ... LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •