Results 14 to 26 of 106
Thread: Daikin D-BACS Interface
-
04-28-2011, 10:14 PM #14
New Guest
- Join Date
- Apr 2011
- Location
- adelaide south australia
- Posts
- 3
hi to all
im new to this
does someone have the setup MS3 software they can email to me
i am trying to discover the bacnet points on a DMS502B51 WITH A TRIDIUM jace 600
using bacnet/ip, and it cannot discover this daikin box. perhaps it needs to be enable with this software
Daikin dont know what im talking about?
any help is much appreciated
Stan
-
04-28-2011, 10:33 PM #15
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
Stan,
Can you ping the gateway but not discover points? Are you on a different subnet than the gateway? If so the gateway might have to be setup as a foreign device.
Pres
-
04-28-2011, 11:22 PM #16
New Guest
- Join Date
- Apr 2011
- Location
- adelaide south australia
- Posts
- 3
yes i can ping it
but it wont discover
-
04-29-2011, 10:20 AM #17
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
What IPs for the jace and the gateway? I'll send you the setup tool.
Pres
-
04-29-2011, 10:36 AM #18
Professional Member
- Join Date
- Feb 2005
- Posts
- 1,069
Presidente, could you send the setup tool to me as well?
thanks.
-
04-29-2011, 10:52 AM #19
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
amigo, check your mail.
Pres
-
04-29-2011, 11:16 AM #20
Professional Member
- Join Date
- Feb 2005
- Posts
- 1,069
Gracias.
-
04-30-2011, 08:04 AM #21
New Guest
- Join Date
- Apr 2011
- Location
- adelaide south australia
- Posts
- 3
Thanks much appreciated
I'm using a web /jace600 with bacnet over ip and have the second port enabled with the ip address of the Daikin bacnet box 192.168.0.1 which is the default ip address
I can ping the Daikin box directly through the pc however the Jace can't discover anything when connected in!
All I want to see weather bacnet is enabled in the Daikin box and if so then the problem possibly is with the jace.
So a start is to see with this software if bacnet is enabled??
Thanks again
Regards
Stan
-
04-30-2011, 03:58 PM #22
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
De nada and you're welcome.
-
04-30-2011, 04:07 PM #23
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
Ok, what's the IP address of the Jace? It will have to be 192.168.0.X if the gateway is left at default IP of 192.168.0.1 without enabling the gateway as a foreign device.
If it is on a different subnet, say 192.168.1.1, foreign device will have to be enabled inside the gateway and this IP address must be put in so the gateway can send out a request to be added to the BBMD foreign device table.
BACnet does not need to be enabled. As long as the battery backup switch is turned on and it has an IP address, it is ready to rock. Is the VRV system already connected to the gateway? If not, you will get no points.
Pres
-
05-31-2011, 07:39 AM #24
New Guest
- Join Date
- May 2011
- Posts
- 1
Please for the love of everything that is holy send me the setup tool too.
Getting this from Daikin has proved to be more difficult than pulling 5 girls home from an FHM event.
Thanks in advance. my email address is in my sig
-
06-23-2011, 10:19 AM #25
Regular Guest
- Join Date
- Jun 2011
- Posts
- 9
Is there any chance someone could send me SetupMS3? I can't get a response from Daikin and really need this tool. Thank you.
-
06-24-2011, 04:48 PM #26
Regular Guest
- Join Date
- Feb 2010
- Posts
- 28
threefiddy, check your mail.
Pres
Reply With Quote
