Has anybody installed these yet? I had my carrier thermidistat replaced by my contractor. The model I had was no longer available so they put in this Edge one. It seems to be way too sensitive to temp fluctuations. Almost immediately after the furnace shuts off it is calling for heat again. I brought it to the attention of the tech and he had no explanation and there doesn't appear to be any type of adjustment to decrease its sensivtivity. He couldn't find an anticipator setting adjustment in the configuration setup. It"s almost like just a tenth of a degree drop in temp will energize a call for heat. Ridiculous. I know there's not a house built that won't have some slight temp drop after the system shuts off.
And it definitely is not observing the cycle timer which supposedly limits how many cycles per hour the system can run. It is configured at 4 but I know it cycles way more than that.
Is this just another example of "new and Improved" that just worse than the "old and proven"? Thanks