Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2006
    Location
    New Hampsha'!!!
    Posts
    274

    Microzone-1 and GCS

    unfortunatly i geuss im supposed to troubleshoot a MZ1 with a GCS tommorow and i have never seen it, i have seen some GCM MZ2 so i am kinda familiar with that just curious if anyone had any input, doesnt the GCS have a prop. bus of its own? i heard it sends points through the GCS and thers no program in the MZ??? any input is appreciated thanks
    dont worry what people think, they dont do it often

  2. #2
    Join Date
    Oct 2007
    Location
    Northeast
    Posts
    29

    Yeah!

    Good luck! The MZ1 is canned. I belive that the only way to program them is through DIP switches. There are diffrerent ones for different apps. I havent worked on a GCS, though I have seen them. I belive you can connect to one like you connect to a GCM (modem cable). They do have there own bus to talk to a GCM & other GCS's. I'll try to dig up some info on the source & send it to you.

  3. #3
    Join Date
    Feb 2008
    Location
    OZ
    Posts
    39
    refridge.

    The GCM will have a "block" of programming for the MZ1. Only minor adjustments are available. They are preconfigured.
    The GCS is only an I/O panel.
    You will find "block" for the I/O in the programming. (GSC# P#).
    VT100 will get you all you need. Its all very straight forward.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event