Alerton BCM-TUX Info
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2007
    Location
    Sacramento, CA
    Posts
    250

    Alerton BCM-TUX Info

    Looking for manuals on configuring Alerton BCM-TUX device.
    How to connect to it?
    I know that I need Envision software.
    Do I need that to configure the BCM-TUX device?
    Are the points that come from IBEX to BACnet have to be manually configure or does the device itself translate, then apply the appropiate information for them.

    Lontshooter

  2. #2
    Join Date
    Dec 2008
    Location
    Dallas, Tx
    Posts
    104
    How to connect to it?
    I know that I need Envision software.
    Do I need that to configure the BCM-TUX device?
    Are the points that come from IBEX to BACnet have to be manually configure or does the device itself translate, then apply the appropiate information for them.

    You need a BCM-ETH unless things changed to route the BCM-TUX through.

    The BCM Tux acts like a APEX or LT so any code their needs to be replicated in BCM Code and then you auto discover the tuxes.

    You need one BCM per trunk. APEX's can have up to 4.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event