Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2010
    Post Likes

    Quadrafire Castile Stove ignitor short

    An old version ignitor wire wore and shorted near the ash box. It was replaced with a new version ignitor but I now do not have voltage to it. The stove works fine when manually lit, no fuses appear to be blown. I'm thinking the control panel needs to be replaced unless you guys have another thought on the situation, thanks.
    Last edited by casefab1; 01-04-2010 at 12:10 PM.

  2. #2
    Join Date
    May 2005
    Madison, WI
    Post Likes
    It only has one fuse, so if that is verified with a multimeter, and there is no voltage, then the control box may have been shorted out. I would check the fuse with a meter though, I have seen them look fine, but test bad.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.