Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2006
    Posts
    33

    Lennox Fireplace Question

    Hi,

    I am posting here because I could not find a catagory that was for fireplaces. We have a MPD3530CNM that I have an FBK-100 blower kit on order for. I was looking at my FP and was wondering, can this blower be installed by inserting it in to the box containing the controls by removing the lower grate, or do I need to remove the screen, logs, etc. and lower it into the box? Thanks for any help.

    TJ

  2. #2
    Join Date
    Dec 2007
    Posts
    4,574
    do some research for the install instruction.

    http://www.lennoxhearthproducts.com/...BLK-blower.pdf

    did it for you, 2 seconds.

  3. #3
    Join Date
    Nov 2006
    Posts
    33
    Quote Originally Posted by pacnw View Post
    do some research for the install instruction.

    http://www.lennoxhearthproducts.com/...BLK-blower.pdf

    did it for you, 2 seconds.

    I found those directions earlier, but I want to eliminate having to pull out all of the grate, logs, etc. if I can. That's why I'm wanting to see if anyone knows if it can be slid in by removing the lower louver. It looks like I may have to remove the control panel inside the lower box, but that would probably be easier than going in from the top, in my case anyway.

  4. #4
    Join Date
    Jul 2006
    Location
    Virginia
    Posts
    390
    It is much easier to put it in from the top like the instructions say. You may be able to install it from the bottom, but it will take 3 times longer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event