Results 1 to 4 of 4
-
12-09-2009, 02:46 PM #1
Professional Member
- Join Date
- Nov 2009
- Posts
- 145
Tridium R2 Program block: binary enabled timer
Looking for a program code to perform a timer function that starts counting up seconds after a binary contact is engaged. Anyone out there done this?
-
12-09-2009, 03:38 PM #2
Professional Member
- Join Date
- Aug 2006
- Location
- UK
- Posts
- 336
Not simply like that - What do you want to do with the info? You can probably just expose this point from a Binary Input for reference. If you are more specific then we can probably help.
Originally Posted by Ctl-fool
Looking for a program code to perform a timer function that starts counting up seconds after a binary contact is engaged. Anyone out there done this?gnomethang
_______________________________________________
"Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them."
- The Reverend Mother Gaius Helen Mohiam
-
12-09-2009, 03:50 PM #3
Professional Member
- Join Date
- Nov 2009
- Posts
- 145
Delay on function and seconds since went active
am looking for a delay-on-make function, and also want to display seconds elapsed since true condition with adjustable time parameter.
-
12-09-2009, 03:55 PM #4
Professional Member
- Join Date
- Aug 2006
- Location
- UK
- Posts
- 336
Hmmm - I have a delay On/Off program object for a Binary State. I could send that tomorrow when I am at the office (21:00 here!).
You can probably display the elapsed seconds no problem using a reset on the BI - I will check.
What is the adjustable time parameter for? Alarm after a certain active time? If so the BI can handle that as well, can it not?.gnomethang
_______________________________________________
"Once men turned their thinking over to machines in the hope that this would set them free. But that only permitted other men with machines to enslave them."
- The Reverend Mother Gaius Helen Mohiam
Reply With Quote
