Hi all, I installed a used Quadra-fire 1100 pellet stove insert and it functioned fine for about a month and then just stopped working. I can hear the thermostat kick in and then just nothing. I have cleaned the firebox and heat exchanger. Checked the fuse and verified I have power to the unit. Checked around for loose wires. And have not found anything yet. I removed one end of the vacuum hose and sucked on it a little and the auger motor started up. I am unsure the sequence of fans that start up. I have searched the forums that i could find, and see references to snap discs but I cannot locate or identify them. Any help would be appreciated.