I went all McGiver on a Mani ;)

[Wheelbaron]

Had a Mani today that the round magnet on the curtain had disapered. I Could not find it anywhere and can't get a new curtain till Tuesday. What to do?

Well I had a cheapo extendable magnet pickup tool with a small magnet on it. I drilled the hole in the curtain out a little bigger, and taped the wand part of the tool on to the outside of the curtain with the magnet sticking through the hole.

Worked like a charm, lol. I may end up having to replace the curtain switch too when the curtain comes in due to using too strong a magnet, but at least it was working good for a Friday night.

[KB Cool]

Buy some spare magnets from your mani supplier. And glue them into the curtain.

[Wheelbaron]

Sounds like an idea, my local supplier was looking quick at 4:30pm on a Friday, and they did not think you could get just the magnets. But I will check again with them on Monday.

[coolerfixer]

Here's the p/n on a Qdual:

605096-1

There kinda spendy for a little magnet though.