The prb004 is like a trane tracer summit bacnet over ip installation guideline (i dont remember the actual title) while the prb002 is the bacnet commisioning guide (that one I dont hve it yet).
In my case I will be integrating liebert equipment (site link-E and some intellislot) into a tracer summit network (havent done it before) and Im gathering as much info as I can before actually doing the work. I know that there are probably a couple of guys here that have done it already so any tip will be apreciated.
I am getting ready to reprogram a tracer panel, and it seems a lot easier with the programming worksheets. I am looking for tracer 100 series programming guide and the old PW manual that has all the blank sheets in it. If anyone has a copy they could send i would greatly appreciate it.