Results 1 to 12 of 12
  1. #1
    Join Date
    Apr 2002
    Location
    Texas
    Posts
    165
    During the last 4 years we've done several hundred inspections for insurance companys.

    This home had three furnaces just like this one installed by large contractor all in the same manner at the same time.

    Frank

    [Edited by Boss on 12-29-2003 at 05:15 PM]

  2. #2
    Hori-upflow-zontal?

  3. #3
    Join Date
    May 2000
    Location
    Urbandale IA. USA
    Posts
    4,962
    I would go back and look up to see who the mechanical inspector was.

    Just another reason why inspectors aren't the answer to insuring proper installations.

    Those who dance, appear insane to those who do not hear the music.
    Those who believe, appear ignorant to those who do not know God.

  4. #4
    Join Date
    Apr 2002
    Location
    Texas
    Posts
    165
    No permit had been pulled, as is the case with most of the pictures I will post. Almost all are replacement, not new install.
    Frank

  5. #5
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,613
    What is that thing? Inshot burners? How well do they shoot down?

  6. #6
    Join Date
    Jun 2003
    Location
    richmond va
    Posts
    80

    Smile

    In are area you have to pull a permit to replace a oil or gas system.if not the company could get fined. Those installers were typyical did not read the installation instructions.

  7. #7
    Join Date
    Dec 2002
    Location
    the lovely state of Kansas
    Posts
    671
    Originally posted by BaldLoonie
    What is that thing? Inshot burners? How well do they shoot down?
    Don't you know that they came out with Down Shot burners.

  8. #8
    Join Date
    Feb 2001
    Location
    Arizona
    Posts
    5,473
    Is that FLEX gas line running TIGHT and thru the metal hole on the furnace? That's another no-no!

    Who knows. Maybe the burners will work fine just like that.

    What a fricking joke tho. Musta learned how to install from the typical Phoenix installer! Sh*tty Sh*tty!

  9. #9
    Join Date
    Feb 2004
    Location
    atlanta,ga
    Posts
    24
    Well atleast they used double wall pipe to connect the flue uncle Reub would still be proud

  10. #10
    Join Date
    Feb 2004
    Location
    Midwest
    Posts
    9,937
    Izzat..... conduit strap?..... with aluminum duct tape... supporting the unit????

  11. #11
    Join Date
    Jun 2001
    Posts
    3,918

    Talking Well Bubba

    It will fit better if we turn it like this. Yeah just use the old gas line. It's OK

  12. #12
    Join Date
    Oct 2003
    Location
    Florida's space coast
    Posts
    2,538
    Originally posted by themadpiper
    Hori-upflow-zontal?
    Looks more like a hori-downflo-zontal.
    We've been doing so much,for so long,with so little, that now we can do almost anything, with nothing at all.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event