Sensor wallplates
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2005
    Location
    south
    Posts
    588

    Sensor wallplates

    Doing a controls retrofit and the existing zone sensors are mounted horizontally on a recessed 2x4 j-box. New sensors(Carrier T56) need to be vertically mounted.
    Anybody got any suggestions on a decent looking adapter plate? I Tried a generic oversized t-stat wallplate and it looked like crap.

  2. #2
    Join Date
    Jun 2009
    Location
    StL, MO
    Posts
    579
    Here's a link to what Kele offers.

    http://www.kele.com/WorkArea/DownloadAsset.aspx?id=1878
    UA LU 562

  3. #3
    Join Date
    Jan 2003
    Location
    USA
    Posts
    1,641
    I have always used double or triple gang blanks, anchor them over the hole and then mount the new sensor to that.
    Last edited by orion242; 10-23-2009 at 08:39 AM.

  4. #4
    Join Date
    Mar 2005
    Location
    Pacific Time Zone
    Posts
    4,184
    http://www.bapihvac.com/Adaptor_Plate.htm

    They also sell insulators to go with these plates.
    "How it can be considered "Open" is beyond me. Calling it "voyeur-ed" would be more accurate." pka LeroyMac, SkyIsBlue, fka Freddy-B, Mongo, IndyBlue
    BIG Government = More Dependents
    "Any 'standard' would be great if it didn't get bastardised by corporate self interest." MatrixTransform
    http://threedevilskennel.com/ - not my website.
    Versatile Hunting Dog Federation - www.vhdf.org/


  5. #5
    Join Date
    Jun 2007
    Posts
    152
    Carrier also sells the backplates for this problem.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event