Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2009
    Post Likes

    Building Information Modeling

    I could not find any group or discussion which has been created catering to BIM requirements of HVAC companies. Even ASHRAE acknowledges importance of BIM and had 4 sessions during it Orlando convention.


  2. #2
    Join Date
    Feb 2004
    New Mexico
    Post Likes
    Probably because there are no requirements as far as HVAC companies go. This is an engineering problem and beyond the scope of all but the big ones that also do their own engineering.
    By engineering I mean a professional with a stamp.
    Most larger jobs are off a set of prints that have been engineered. Some smaller ones too.

    But your idea of a forum is a good one. Sometimes posts will show up here from time to time that ask these types of questions and will get few answers. Some here are engineers but most are techs or tradesmen.
    I should have played the g'tar on the MTV. MK

    You can be anything you want......As long as you don't suck at it.

    SMW Lu49

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.