Results 1 to 9 of 9
  1. #1
    Join Date
    Mar 2006
    Location
    Wakulla County, Florida
    Posts
    151
    Post Likes

    York YCAS250 Microprocessor Help

    Installing a new board in chiller. I tried to program the 21 different menus and can find only 14. The chiller will run a comp for about a min. and then go off on over amp because one of the menus I cant find is motor current setting. Do I need to set a dip switch to get to these additional 7 menus? I have used the password given in the IOM (7396) and also the York password (9675). Still cant find.
    You are who you are and where you are because of what you think.

  2. #2
    Join Date
    Dec 2006
    Posts
    39
    Post Likes
    There is a another secret code and i am trying to remember it as I type. This code will get you into the screen you need, i then right down the specs on the inside of the panel. Try 5244??? Get right back to me and let me know, i'm starring at my phone trying to remember.

  3. #3
    Join Date
    Dec 2006
    Posts
    39
    Post Likes
    or try 5422, i am real close.

  4. #4
    Join Date
    Dec 2006
    Posts
    39
    Post Likes
    try 5144, i keep looking at the numbers on the phone to remember the sequence.

  5. #5
    Join Date
    Mar 2006
    Location
    Wakulla County, Florida
    Posts
    151
    Post Likes
    I got rained off the job. I will let you know if any of those worked. Thanks for the info.
    You are who you are and where you are because of what you think.

  6. #6
    Join Date
    Dec 2008
    Location
    Dixiana, AL
    Posts
    2,620
    Post Likes
    5144

  7. #7
    Join Date
    Mar 2006
    Location
    Wakulla County, Florida
    Posts
    151
    Post Likes
    We got a winner. 5144. Thanks for the info guys.
    You are who you are and where you are because of what you think.

  8. #8
    Join Date
    Sep 2007
    Location
    Somewhere in the world.
    Posts
    1,665
    Post Likes
    The code Klove gave is the correct one if you changed the micro board or expansion module you will need the set the motor protection info. back up as you are already experiencing problems due to that.
    A mind is like a parachute. It doesn't work if it is not open.

    The best part of going to work is coming back home at the end of the day.

    Hard work spotlights the character of people: some turn up their sleeves, some turn up their noses, and some don't turn up at all.

  9. #9
    Join Date
    Dec 2006
    Posts
    39
    Post Likes
    Right on!!! Glad it worked!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Quality Home Comfort Awards