wire in a wood burning coil
I need a drawing on how to wire up a wood burning outdoor unit with a package Heat pump with Electric back-up. So i want 3 heat 1 cool. with 1 thermostat. any ideas?
The wood burner has a 110 volt circulating pump.
We do not cater to DIYs.
The people you bought it from should have provided ALL necessary wiring diagrams and installation information.
If they did NOT, then you need to hire a PROFESSONAL to install it.
This is NOT a Do It Yourself site.
Those who dance, appear insane to those who do not hear the music.
Those who believe, appear ignorant to those who do not know God.
I deleted your other post about the same thing. Please do not make duplicate post in the forums.
can i not get advice? I am a tech in southern Ind.
Originally Posted by cehs
Last edited by doctordarnell; 10-05-2009 at 05:28 PM.
We don't allow technical discussion about wiring etc in the open forums, too many people out there that can hurt themselves.
If you want to get your 15 posts, apply for Pro Membership we will help you in the private forums.
Welcome to H-Talk!
Sorry, this is not a DIY site. So we are not allowed to give out advise of this nature.
Since answering your question in the open Residential Forums would be posting instruction for DIYers that may read this post later.
If your in the trade, get your post count up to 15, and apply for Pro Membership.
Then use this link Apply for Pro Membership
Once accepted, you have access to the pro tech forums. Where you can ask and get answers to technical questions.
Plus, you also have access to the Pro Educational Forums.
All of it is free.
Originally Posted by beenthere
Originally Posted by HeyBob
You can introduce yourself in teh general forum. That post will count as 1 of your 15.
Your post don't have to be HVAC in nature to count.
You could hit 15 tonight yet.