cvhe economizer line cold and sweaty

[klove]

hey klove
we'd love to have you here in kc!!!!!!!!!!!!!!!!!!!!!
providing you could live on 39.96 hr??????????

we are so slow it is making me worry, i have not missed any hours but it is coming!

I know exactly what you are saying.
I am not sure why the split is only 6?????????????????
i think i may slow the water down a bit get it to 10 and go from there

I honestly did not know exactly what my dsh was supposed to be, and got my answer from you guys.

it did seem okay.



I will load it up saturday and record everything possible and post it again


have fun in manhattan

you do mean manhattan kansas right!!!!!!!!!!!!!!!

I did mean Manhattan, Kansas.

Don't slow the water down!!!!!! What % of FLA are you running when you have 6* TD? You can make the chiller run 10* when it's only 40% loaded on the motor just by moving the water slow enough......

[supertek65]

you are confusing me!!!!!!!!!!!!!!!!!!

slowing the water down or closing down the leaving water butterfky valve will NOT increase my delta t???????????? to 10 or are you saying i should leave it alone because the chiller is not loaded up?

I did mean Manhattan, Kansas.

Don't slow the water down!!!!!! What % of FLA are you running when you have 6* TD? You can make the chiller run 10* when it's only 40% loaded on the motor just by moving the water slow enough......

[heavymetaldad]

leave the water flows alone, froooooooonkkkkkk. until you get the design. the day you fiddle with flows without info, the minute you're outta the bldg. will be trouble

[Healey Nut]

Its makin cold water , If the amperage is not jumping aroung (carryover) leave it alone .
If it aint broke dont fix it !!!!!!!!!!!!!!!!!!!!!!!

[supertek65]

YES SIR!!!!!!

leave the water flows alone, froooooooonkkkkkk. until you get the design. the day you fiddle with flows without info, the minute you're outta the bldg. will be trouble

[supertek65]

hey watz up graham????????????????????????????

havent seen u in a while??

I know!!!!!!
leave it alone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1

Its makin cold water , If the amperage is not jumping aroung (carryover) leave it alone .
If it aint broke dont fix it !!!!!!!!!!!!!!!!!!!!!!!

[supertek65]

hey heavy!!!!!!!!!!!
i am goin to give you a call tomorrow when i get off!!!

leave the water flows alone, froooooooonkkkkkk. until you get the design. the day you fiddle with flows without info, the minute you're outta the bldg. will be trouble

[heavymetaldad]

that reply can be taken in more than one way!
should be home by 3ish, central time

[supertek65]

omg!!!!!!!!!!!!


when i get off work!!!!!!!!!!!

that reply can be taken in more than one way!
should be home by 3ish, central time