Results 1 to 4 of 4

Thread: ELETRICAL

  1. #1
    Join Date
    Sep 2003
    Location
    Ford motor co.
    Posts
    8

    Confused

    INSTALLED A 3TON UNIT RUNS GREAT, BUT WHEN CYCLES ON THE LIGHT DIMS SLIGHTLY. CHECKED ALL CONNECTIONS IF LOOSE. USED #6GAUGE ALUM. WIRING FROM DISCONNECT BOX TO MAIN PANEL.
    USING DELAY FUSES

  2. #2
    Join Date
    Sep 2003
    Location
    De.
    Posts
    49

    Post

    INSTALLED A 3TON UNIT RUNS GREAT, BUT WHEN CYCLES ON THE LIGHT DIMS SLIGHTLY. CHECKED ALL CONNECTIONS IF LOOSE. USED #6GAUGE ALUM. WIRING FROM DISCONNECT BOX TO MAIN PANEL.
    USING DELAY FUSES

  3. #3
    Join Date
    Jul 2003
    Posts
    33

    hard start kit

    does the unit have a hard start kit. try installing hard start kit consists a relay and a start cap

  4. #4
    Join Date
    Sep 2003
    Location
    miichigan
    Posts
    9

    Talking hey spooky!

    what is the service panel rated at? 100 amp 60 amp????
    also are there any major app running at time of start up.
    you may wanna do an amp draw on the a/c.. good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event