Results 1 to 4 of 4
Thread: york screw machine
-
08-22-2009, 08:17 PM #1
Professional Member
- Join Date
- Mar 2005
- Location
- N.J.
- Posts
- 149
york screw machine
Calling all chiller techs,Please refer to my post under this title at commercial ac forum as Im stumped on this one and can use all the help I can get!!!!!
-
08-24-2009, 08:10 AM #2
Professional Member*
- Join Date
- Sep 2007
- Location
- Somewhere in the world.
- Posts
- 1,461
Do you have a contact phone # to be reached at send me a private message with the info.
Arguing with your Boss is like wrestling with a pig in
mud.
After a while you realize that while you are getting
dirty, the pig is actually enjoying it.
It is not exactly cheating, I prefer to consider it
creative problem solving.
25 years ago we had Bob Hope , Steve Jobs , and Johnny Cash today we have no Hope no Jobs and no Cash !
-
08-25-2009, 07:55 PM #3
Professional Member*
- Join Date
- Dec 2008
- Location
- Dixiana, AL
- Posts
- 2,499
Drummin' ya' up some business there, 56?
-
08-26-2009, 07:40 AM #4
Professional Member*
- Join Date
- Sep 2007
- Location
- Somewhere in the world.
- Posts
- 1,461
Not really just tryin to help out without the VSD drive book in front of you it difficult to troubleshoot also fault that he is describing low motor current is not in the listing for faults which tends me to believe that it is going into pre-charge but never starts indicating compressor is not running or compressors I think there is a problem with the trigger board they have had numerous failures with that board due to lighting and brown outs if that board has all the power to the proper connections and power on L1 , L2 , L3 it is dead.
Arguing with your Boss is like wrestling with a pig in
mud.
After a while you realize that while you are getting
dirty, the pig is actually enjoying it.
It is not exactly cheating, I prefer to consider it
creative problem solving.
25 years ago we had Bob Hope , Steve Jobs , and Johnny Cash today we have no Hope no Jobs and no Cash !
Reply With Quote
