Results 1 to 9 of 9
Thread: Slight problem
-
08-06-2009, 12:18 AM #1
Member
- Join Date
- May 2009
- Location
- queens ny
- Posts
- 31
Slight problem
My blower in my central air conditioner is not working and my suction line is freezing up. I never had the line freeZing up ever could the blower being off causing the line to freeze up?
-
08-06-2009, 12:33 AM #2
Professional Member*
- Join Date
- Jul 2008
- Location
- Denver, CO
- Posts
- 4,172
I bet my paycheck on it.
-
08-06-2009, 12:34 AM #3
Professional Member
- Join Date
- Apr 2007
- Location
- St.louis metro area
- Posts
- 315
Originally Posted by SixInOne
I would say that it is a safe bet that your flux capacitor is bad.
-
08-06-2009, 01:29 AM #4
Professional Member*
- Join Date
- Jul 2001
- Location
- Central MN and the Twin Cities
- Posts
- 1,516
Originally Posted by Joe Cool
lol LOL ROTFLMAOWarning: Just because I am over the head injury doesn't mean I'm normal!
The day I stop learning.... I'm dead!
-
08-06-2009, 01:31 AM #5
Professional Member*
- Join Date
- Jul 2001
- Location
- Central MN and the Twin Cities
- Posts
- 1,516
Originally Posted by SixInOne
No airflow through the coil means no heat to absorb....... yes, turn everything off now and get it fixed.Warning: Just because I am over the head injury doesn't mean I'm normal!
The day I stop learning.... I'm dead!
-
08-06-2009, 01:47 AM #6
Professional Member*
- Join Date
- Jul 2008
- Location
- Denver, CO
- Posts
- 4,172
You obviously haven't heard of the box fan in place of the blower door trick. Originally Posted by grasshopper
-
08-06-2009, 01:51 AM #7
Professional Member
- Join Date
- Jun 2008
- Location
- Knoxville, TN
- Posts
- 110
Can't you just set a box fan at the return and let it blow into it? That will spin the blower wheel as well.
-
08-06-2009, 03:53 AM #8
Professional Member
- Join Date
- Apr 2007
- Location
- St.louis metro area
- Posts
- 315
I still say that the first thing that you need to check is the flux capacitor. I bet out of 100 blowers that I have seen not working, 90 of them had a defective flux capacitor.
Everybody on this site knows this but don't want to help you out do to the rules of the site. We aren't allowed to help do it yourselfers.
But you seem like a nice guy so I don't mind bending the rules to help you out.
If the above doesn't solve your problem you might have to use your tricorder to check out the isolinear chip. But if you don't have the proper equipment, you will probably have to call a professional.
Oh, by the way, I wouldn't listen to what these other guys are telling you. They are just blowing smoke out of their but.
You are welcome
Now you owe me a beer!!!!
Keep us postedLast edited by Joe Cool; 08-06-2009 at 04:02 AM. Reason: additional useful information
-
08-06-2009, 05:32 AM #9
Global Moderator
- Join Date
- Jan 2004
- Location
- Lancaster PA
- Posts
- 62,193
Call a contractor.
No DIY.
Thread closed
