Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2007
    Location
    Colorado
    Posts
    1

    Compresor contactor problem

    I have 220 volts to the line side of the contactor and 24 volts to the coil. The contactor is pulled in but I have no power on the load side of the contactor. I replaced the contactor wirh a new one and still have the same problem. All wiring is clean and tight at the contactor. Any ideas of waht is wrong? Thanks

    Mark

  2. #2
    Join Date
    Jan 2004
    Location
    Lancaster PA
    Posts
    68,334
    Now would be a good time to call a service contractor.

    Sorry, this is not a DIY site, Please read site rules, Thank you.

    If yoour in the trade, get yoour post count up to 15, and apply for pro membership, Once accepted, you can ask questions in the pro forums, and get answers.

    Thread closed.
    Contractor locator map

    How-to-apply-for-Professional

    How many times must one fix something before it is fixed?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event