I am working on a Climate Master Tranquioity 27. It has been in service without any problems for more than 2 years. Late this spring the compressor started to trip of after running anywhere from 2 to 4 minutes. The CXM board does not provide any alarm code flash. I thought that it might be a water flow problem - replaced the solenoid valve and problem still persists. I even ran the bleed overboard dump at 5 gpm and it tripped.
There is no signal that the compressor tripped. THe water flow continues until the compressor trip recycles. Any ideas? This is my first post here but short of getting in and measuring pressures and taking a lot of time, I thought someone may have an idea. Thanks