union gas interview tips?
Results 1 to 9 of 9

Hybrid View

  1. #1
    Join Date
    Jun 2009
    Location
    Ontario, Canada
    Posts
    1,017

    union gas interview tips?

    I got an interview call with union gas. any tips from you experts? what could I expect on the interview and how many stages is the interview?

  2. #2
    Join Date
    Mar 2009
    Posts
    8
    try your best. Tell them what you know and you will just fine. Good luck

  3. #3
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    256
    Just be your self
    Answer anything they ask you as honestly as you can.
    If you don't know the answer say so.
    Don't be afraid to ask them questions either.

  4. #4
    Join Date
    Jun 2009
    Location
    Ontario, Canada
    Posts
    1,017
    thanks guys. I went to the interview on thursday. they received 500 resumes for 1 position...

  5. #5
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    256
    Did you get it?
    or they will get back to you?

  6. #6
    Join Date
    Jun 2009
    Location
    Ontario, Canada
    Posts
    1,017
    they will get back to me. hire date is sept 21st.

  7. #7
    Join Date
    Apr 2002
    Posts
    11,808
    I had an interview with them years back

    "Where do you see yourself in the future with Union Gas?"

    "What is your opinion when it is difficult to apply a code?"
    The way we build has a greater impact on our comfort, energy consumption and IAQ than any HVAC system we install.

    http://www.ductstrap.com/

  8. #8
    Join Date
    Jun 2009
    Location
    Ontario, Canada
    Posts
    1,017
    Quote Originally Posted by Carnak View Post
    I had an interview with them years back

    "Where do you see yourself in the future with Union Gas?"

    "What is your opinion when it is difficult to apply a code?"
    thanks, that would be helpful for the next interview stage. If I go through this I will be doing the 2nd stage with the district service manager, HR, and senior service tech around.

  9. #9
    Join Date
    Oct 2005
    Location
    Canada
    Posts
    256
    I remember some years ago long before the TSSAs time a union gas central split ac had to go in at a place.
    The warm air, discharge plenum was butted up tight to the floor joists as many of you know this was frowned on and in fact a code violation.
    The local enforcing authority used to be the gas distributer,company of course.
    A meeting was at the house and the sales rep wanted it installed without notice to the plenum.
    Keep in mind this was in another gas companies territory.
    The enforcing authority in whose city the job was being installed wanted the plenum cut down and lowered.
    This was not done.
    How do I know?
    I know because a relative of mine was present at the meeting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event