I am looking for some advice from you guys.
I am looking at purchasing a new Bryant HVAC system and need some advice as to how good this combo is.
My contractor said he could sell me the following items for a 2100 sq ft house in Texas. Please note this part of the country is dry and very HOT during the summer. The temp here for the past few weeks has been over 100 every day. It is also normal to use the AC in December for a week or 2 every once in a while so I need to make sure the AC is good.
The proposed items are as follows.
Outdoor unit = 4 ton Bryant model 124ANA048-C (supposed to be a 16 SEER dual stage I believe)
Coil = ADP model C60A245C33(6,9)
Furnace = Bryant 313*AV060110 (Supposed to be a multi speed furnace)
I need to make sure that the system is properly matched. I assuming that it is matched properly because he showed me the copy of the AHRI (#3336381) certification for the 1500 tax rebate.
Also I am confused as to why the coli is an ADP and not a Bryant. Is this normal to use other manufacturer’s coils to get good efficiency or is it that Bryant does not make a coil that will get the tax credit and he chose the ADP so I could get it? I am not going to say price is not that big of a concern to me but I do wish to make sure that I get good equipment and if I need to spend more I will.
Thanks for the help