Results 14 to 21 of 21
Thread: Johnson Controls Training
-
08-22-2009, 03:34 PM #14
Regular Guest
- Join Date
- Jan 2005
- Posts
- 3
JCI Training
I recently took the 389 course Metasys extended architechture coures for building engineers. The instructror was great, covered a lot of meterial in the week long course.
Each subject was covered well with plenty of time for questions, then they had computor set up to practice what you where just learned.
-
12-11-2012, 02:37 PM #15
Professional Member
- Join Date
- Sep 2012
- Location
- New York, NY
- Posts
- 43
Has anyone gone for "FX supervisory controller engineering and setup" training?
Feedback please?
-
12-11-2012, 04:17 PM #16
Professional Member*
- Join Date
- Mar 2009
- Location
- Several Miles from Sane
- Posts
- 1,401
Old thread but still relevant.
Yes, but it was back in 2005, 2nd class they did. Great Class, I am sure it has even improved over time.
Are you asking as an end user/operator or as a Controls/SI individual ?
As an operator you will likely get lost in the technical stuff unless you have lots of "Controls" experience. Possibly a bit expensive unless you have a campus or several sites you have to take care of.
As a Controls/SI person it will be heavy on the JCI Appliance functionality end things.
May I ask why you inquire ?If sense were so common everyone would have it !
All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!
-
12-11-2012, 04:34 PM #17
Professional Member
- Join Date
- Sep 2012
- Location
- New York, NY
- Posts
- 43
I am a controls engineer being sent by my company for training... (one year in the controls field)
most of my work is with JCI and have some experiance with FX Supervisory Controllers...
just wanted a heads up and some feedback on the course from those that went.
-
12-11-2012, 09:18 PM #18
Professional Member*
- Join Date
- Mar 2009
- Location
- Several Miles from Sane
- Posts
- 1,401
Enjoy !
Where are they sending you for the class ?If sense were so common everyone would have it !
All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!
-
12-12-2012, 05:21 AM #19
Professional Member
- Join Date
- Sep 2012
- Location
- New York, NY
- Posts
- 43
Thanks!
Baltimore.
-
12-12-2012, 10:30 AM #20
Professional Member
- Join Date
- Apr 2011
- Location
- Pennsylvania
- Posts
- 94
Depends on the instructor
From what I hear, the class depends greatly on the instructor....
My supervisor had JCI training in Arizona last year and it was not so good, but this year he had a class in Baltimore and said that it was good.
-
05-12-2013, 02:41 AM #21
Regular Guest
- Join Date
- Jan 2008
- Location
- Southern California
- Posts
- 18
The JCI institute produces really good documentation with step by step instructions on how to do many things. The normal JCI manuals do not lay things out step by step.
Reply With Quote
