Page 1 of 3 123 LastLast
Results 1 to 13 of 36

Hybrid View

  1. #1
    Join Date
    Dec 2007
    Location
    North Central Florida
    Posts
    3

    Staefa Controls PC Tool

    I have been reading the other posts on the Staefa PC tool program. I am very interested in obtaining a copy if possible. My smart tool has given up the ghost...

    Disclaimer: I'm not a big poster here (or on the fishing forum I belong to) as my knowledge base is limited to the facility I'm with. I have a Staefa contol system that was installed in 1990. It was upgraded several times early on and it's been mainly a maintenance relationship since then. I've read the rules and believe me, I hate to post for the second time and request assistance but after seeing that several people have offered PC tool to others I thought I would at least test the waters.

    I had PC tool in the past and used it to tunnel to the smart card via the trunk/address but it was lost in a hard drive crash many moons ago. I still have a couple of PC's capable of running DOS based programs and just recently retired the Staefa front end for Siemens Insight.

    Any assistance would be appreciated and if I can return the favor with information on some very old Staefa equipment let me know.

    Thanks! Lightfoot

  2. #2
    Join Date
    Jun 2005
    Location
    Ohio
    Posts
    1,720
    You've got mail.
    Jogas
    Four wheel therapy, my 1968 Camaro is gone and will be missed

  3. #3
    Join Date
    Dec 2007
    Location
    North Central Florida
    Posts
    3
    Thanks jogas!! I appreciate the assistance!!

    Lightfoot

  4. #4
    Join Date
    Dec 2008
    Location
    Gainesville, FL
    Posts
    20

    staefa

    Lightfoot,
    Are you anywhere near Gainesville?

  5. #5
    Hi, can you send me the pctools software too?

    Thanks

  6. #6
    Join Date
    Apr 2005
    Location
    Perth, Western Australia
    Posts
    107
    Hey jogas,
    Any chance of grabbing a copy as well???

    If so your help would be most appreciated.

  7. #7
    Join Date
    Jun 2005
    Location
    Ohio
    Posts
    1,720
    Quote Originally Posted by grgjohno View Post
    Hey jogas,
    Any chance of grabbing a copy as well???

    If so your help would be most appreciated.
    You've got REALLY late mail.
    Jogas
    Four wheel therapy, my 1968 Camaro is gone and will be missed

  8. #8
    Join Date
    Jul 2009
    Location
    Seattle, WA
    Posts
    2
    Could you send a copy to me as well? I've been trying to cobble together an install for weeks in my 'spare' time.

  9. #9
    Hi jogas

    Just wondering if you could send me a copy as well...?
    Having major problems with my smart tool and then it finally stopped working.So your help would be appreciated and if you can send me details of what cable/cables needed to connect laptop to staefa card and wall sensor. thanks

  10. #10
    Join Date
    Jun 2005
    Location
    Ohio
    Posts
    1,720
    The Smart Tool battery probably went bad.
    I'd try having someone with the proper skills (soldering iron, circuit board) replace the battery first.
    BTW, you may want to include your email in your Profile ;-)
    Jogas
    Four wheel therapy, my 1968 Camaro is gone and will be missed

  11. #11
    My smart tool just took a crap on me. Can anyone please email me a copy of PC tool or tell me were I can get it from. Thanks

  12. #12
    Join Date
    Aug 2011
    Location
    Denver PA
    Posts
    37

    PC-Tool

    Send me an e-mail address and I can send u a copy of PC-Tool. Good luck on getting it to work. It can be a bit cranky. IF you have a smart tool there are places to get them repaired. I would first try to use it with the charger plugged in, if it works replace the battery or just us the charger. U can get a battery at most battery plus warehouses. I have opened mine up and pressed down on the chips to make sure they are seated ok.

  13. #13
    My email address in in my profile

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event