Compressor Info Needed for Italian Gelato Case

[royd2]

what model # dixell? if you can get that you can look up the info online.

[MikeySq]

dont have the model of Dixell but i searched many options on their site closest i got was the XM400 but that is not the one there

[Fridge Repairer]

If you have nothing else to go on go with the lock rotor amp rating and compare it to a copeland compressor. This should get you in the ballpark.

[Fridge Repairer]

Ill guess you want like a KAMB-0075 compressor in there

[FSE_]

Mike
In your first post you said "It looks as it may be similar to a lil Dixell controller maybe." ISA used a number of controllers from different mfgs. that looked similar:
Carel, Carvel, Eliwell and Elstat. I think the are ALL Italian based companies.
I looked through my manuals for the above, but did not see anything that looks like what you have, but it may be an older model. Hope this helps

[K_Neil]

Looks like a "charge by the grey hairs created" job. Never seen those kind of cases at all.