I have a question about this gas valve anyone know what the last 4 numbers of the part number mean.I had one today the part number on the old valve was sv9501m2726 the new one was sv9501m2528.Ths model # of the furnace ntc7100ba3 the serial # is l983947264.The new gas valve will not open the main valve for the burners.I did replace the 24 volt ignitor with it.
Sorry, this is not a DIY site. So we are not allowed to give out advise of this nature.
Since answering your question in the open Residential Forums would be posting instruction for DIYers that may read this post later.
If your in the trade, get your post count up to 15, and apply for Pro Membership.
Then use this link Apply for Pro Membership
Once accepted, you have access to the pro tech forums. Where you can ask and get answers to technical questions.
Plus, you also have access to the Pro Educational Forums.
All of it is free.
You have the post count, apply.
I,m not a DIY,ER I don`t have a copy of my license on my computer and don`t have a scanner to scan it to my computer.I,v been in the feild 15 yrs.From what I read on that app.to join I need to attach a copy of it with my app.
Doesn't tell you that you must send that info. It says it will help.
Its possible that one of the committee members would give you a number to fax copies to. If they need it.
DIY info is not allowed on the open forums. Weather your a DIYer or not.
Thats why we have the restricted pro forums.
O,H I miss understood what I read thanks.I need to have 30 posts on the bissness forum along with the 15 on this forum
Originally Posted by beenthere
By my understanfing, 30 total to apply for both(of course, I'm not on the membership committee, so I could be wrong on that part).
O,K thanks I,ll go back to supply house and find out what I need to know I need to find out ASAP.Then apply for menbership