WANTED grid wires for an old whirlpool ice machine

[MikeIceman1980]

I am also looking for some old cutting Grids or Grid Parts for a Whirlpool Cuber machine. The bigger grids are preferable - I believe model number is CH5.

[sammyray]

I have the small Whirlpool cuber assemblies. Wires are 9 1/2 inches long.

[uniservice]

I've got some wires and some of the pins with the little dog legs in them. Got a couple of freezer plates and some grids for thoses too. Even have some of the thickness sensors with the little motor on them. Need to clean house.

[MikeIceman1980]

Hello, I am looking for the full grids for the large cubes or if you have grid wires and the other parts that go with, that would be great. Thank you.

[ice machine undertaker]

Hello, I am looking for the full grids for the large cubes or if you have grid wires and the other parts that go with, that would be great. Thank you.

What size frames?

[MikeIceman1980]

Mr. Undertaker - I believe they are for a CH5 Whirlpool Cuber, most of the sizes I thought were all the same. Will check it out tonight and get back to you. Thank you!

[MikeySq]

they make nice cubes!

[MikeIceman1980]

Hello: The cutting grids are 19 1/4 x 21" and make the larger cubes, 1 1/4' x 1 1/4" size cubes. Let me know if you have these size cutting grids. I took a picture if you need more info.

Thank you.
Mike

[MikeIceman1980]

Mr. Undertaker, just checking to see if you saw my last post about the size of the cutting grids? Thank you.

Mike

[madhat]

You'd be better off getting a new cutting grid. They changed them to a grid with two continueos wires, this eliminated the conductivity problems with the individual wires, pins, and spring clips.

[baub]

I have a large cube grid- e-mail is in profile.

Also have two half dice cube grids and misc. parts.

[MikeIceman1980]

Hi MadHat, do you have any of these new cutting grids?

Thankyou.
Mike

[MikeIceman1980]

Hey MadHat, do you have any of those new cutting grids?

Thank you.
Mike