Page 2 of 2 FirstFirst 12
Results 14 to 20 of 20
  1. #14
    Join Date
    Oct 2007
    Location
    Daytona Beach, FL
    Posts
    177
    The guy who needed the Palm came by and got it Sunday night for his job. Haven't heard back from him on how it worked out, but my project manager wanted to extend a thank you for getting us the program...
    NeonHomer
    BAS/BMS Technician/Computer Technician

    The definition of cruel joke is when you start work in BAS, and you run into your old T&B employer on the job.

  2. #15
    Hello, two of my balancers want to start using the Palm Pilots again; my question is can the software be installed on a Windows-based device? I have some Dell handhelds in very good condition and was curious if they would be compatible.

  3. #16
    Join Date
    Mar 2009
    Location
    Several Miles from Sane
    Posts
    1,471
    Quote Originally Posted by kgleeson View Post
    Hello, two of my balancers want to start using the Palm Pilots again; my question is can the software be installed on a Windows-based device? I have some Dell handhelds in very good condition and was curious if they would be compatible.
    If you have the MTOOLs software there is a Palm application that will work on a WinXP-Pro OS. Hard part is getting the "Little Black Box" that plugs into a Laptop serial port and then the wall sensor jack (AS-CVTPRO100-1, which is obsolete snaps onto Plam III devices). An AS-CVTPRO300-1 is about 400 plus bucks if you have to buy new. Contact your local JCI channel for more info.
    If sense were so common everyone would have it !

    All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!

  4. #17
    Join Date
    Jan 2011
    Location
    London, England
    Posts
    48
    Quote Originally Posted by CCIKelly View Post
    We always say "Everything is a Controls problem until we prove otherwise".
    That is so very true.

    I may just have to take that as my signature.

  5. #18
    Thank you for the information

  6. #19
    Join Date
    Mar 2009
    Location
    Several Miles from Sane
    Posts
    1,471
    Quote Originally Posted by only1doug View Post
    ...I may just have to take that as my signature.
    Glad to be of service.



    kgleeson, more info on the JCI web site. Put an email in your profile !
    If sense were so common everyone would have it !

    All opinions expressed are my own. Any advice provided is based on personal experience, generally accepted fact or publicly available information. As such, it is worth exactly what you paid for it, not a penny more not a penny less !!

  7. #20
    Join Date
    Oct 2007
    Location
    Daytona Beach, FL
    Posts
    177
    Old topic, different spin, and different employer!!

    I need the Johnson Controls PC balancing software. I have the Metasys box that goes from a serial port on my computer to a stat. It came with a USB to serial adapter, the box, cables, everything... just no software was in the box (as I got it).

    Am I missing something here, or do I need to get in touch with my JCI guy to get the software. From what I was told, we paid about $1400 for this setup...
    NeonHomer
    BAS/BMS Technician/Computer Technician

    The definition of cruel joke is when you start work in BAS, and you run into your old T&B employer on the job.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event