Originally Posted by
nickolas
All of a sudden I find that after working on a project "offline" by opening the local station database, I lose all of the changes that I have made to the database.
For example I duplicate a device already on the N2 nework, change the name of the new device, assign new address etc. It is a new device on the N2 Network. After adding the device I disconnect from the station and exit workbench.
After going thru the above process, I open the local station again and all of my changes are gone, in the example above the new device is gone.
I first noticed the problem when I copied a local station I had been working on, to a new FX20 and both my local staton and the station in the FX20 did not have the changes. (Lost all my work)
Has anyone experienced this problem? If so how can I correct.