Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2006
    Posts
    81

    Correct Operation

    I have a Carrier Infinity Heat pump with the Infinity thermostat. I have the system on cool, and the humidity level set at 48%. The air is set to comfort and the humidity removal is turned on. I assumed that when the system did not call for cool it would still come on if the humidity level was not met? I have the system set at 78 and the house temp was 77. I have the humdity set at 48% and the humidity in the house is 51%. Why isn't my system coming on and du-humidifing my home? Do I have something set wrong?

  2. #2
    Join Date
    Jan 2009
    Location
    Centeral Il.
    Posts
    29
    The dehum mode only reduces the fan speed when there is a call for cooling. Having the humidity set at 48 will only reduce the fan speed until it reaches 48, then the fan will increase to normal speed.

  3. #3
    Join Date
    Jun 2001
    Location
    Louisville, KY
    Posts
    12,132
    Quote Originally Posted by jeepsterman View Post
    The dehum mode only reduces the fan speed when there is a call for cooling. Having the humidity set at 48 will only reduce the fan speed until it reaches 48, then the fan will increase to normal speed.
    That is not entirely correct.

    Read this document.
    Perhaps you should have read the instructions before calling.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event