Results 1 to 2 of 2
Thread: no pride for the Thermopride
03-31-2003, 03:24 PM #1
this is a test, I hope the picture shows up this time :-)
[Edited by Boss on 12-28-2003 at 10:50 PM]
03-31-2003, 03:44 PM #2
When the gas line gets so hot from the flame roll out, you carefully wrap it with pipe insulation. The thing on the floor is a piece of 1/4" floor tile. You install the floor tile underneath the gas valve to keep it from melting down. Robin I think James recommends 1/2" floor tile in this paticular application to prevent gas valve from going NOVA.
This thing was still working.